This guide provides a step-by-step explanation of how to assemble «Le Moineau,» a drone particularly well-suited for beginners in FPV. 🛒 Required materials: A frame: Le Moineau; TPU 3D prints (provided with the chassis); 4 motors (e.g., Sparkhobby 8500kv); 2.5″ propellers (e.g., AVAN Rush); A DJI O4 VTX (see the guide on…)
AM32 firmware is appreciated for the great freedom of adjustment it offers. However, it sometimes suffers from a poor reputation, often due to unsuitable configuration, as the configurator is not always perfect. AM32 is the reference open-source firmware for 32-bit brushless motor controllers (ESCs), used in robots, and…
This guide explains how to prepare a DJI O4 with the best modifications before installing it on a drone. 🛒 Required materials: A DJI O4 VTX, Super Glue (Cyanoacrylate), A DJI O3 lens (approximately €16 on AliExpress) 🛠️ Tools: 3D-printed lens alignment tool (Printables link), A knife without…
